Concrete cutting in Norwalk CA - straight, clean cuts with the dust kept down
Need a trench in a slab, a doorway in a wall or a pipe hole? We make the cut right where you need it.
- Licensed and insured.
- Free quotes on site.
- We respond within 1 business day.
How do you cut through concrete without breaking up the whole slab?
Concrete cutting in Norwalk means sawing clean, straight lines through a floor, driveway, sidewalk or wall, so you can run a trench, open a doorway or take out one section without tearing up the rest.
Most people call T&M Norwalk Concrete Company because something has to go through concrete that's already there, like a drain line under the garage floor, a doorway into a block wall or a trench across the driveway for a new water line. The price moves with the surface, how thick it is, whether there's steel in it and how many feet of cut you need, and a wall usually costs more than a slab. The schedule mostly turns on what we need to know before the saw goes in, like whether there are drawings to check or a scan to arrange, and your written estimate spells out both once I've seen the job.
How we handle a concrete cutting job
I start by looking at the surface, because that decides which saw we bring. I ask for any house drawings you have and set up a scan when there could be steel or cables inside, since some slabs carry rebar, the steel bars that hold the concrete together, or post-tension cables, steel strands pulled tight inside the slab that a saw shouldn't meet by surprise. The scan is a radar check of the concrete, and sometimes an engineer needs to weigh in before we cut, which is why drawings save time. Once we know what's in there, we plan where the water will run, mark the lines and cut wet.
A lot of cutting leads straight into new concrete. When a driveway panel comes out, we can pour it back as part of our concrete driveway building work, and when you're reshaping a back yard, the cuts often clear the way for concrete patio construction.
Flat sawing for slabs and driveways
A walk-behind saw with a big diamond blade cuts floors, driveways, sidewalks and pavement, so it's the one for trenches, taking out a section or squaring off an edge. It suits most flatwork, the ground-level slabs like driveways, patios and garage floors.
Wall sawing for doors and windows
The saw runs on a track bolted to the wall, and it's the standard way to cut a door or window opening into an existing concrete or block wall. It's the one to ask about if you're adding a door from the garage to the yard or opening up a block wall.
Concrete cutting in Norwalk and where the runoff goes
Most of our cutting runs wet, because water cools the blade and keeps the dust out of the air, and the South Coast AQMD, the regional air district, has a dust rule that applies to any work that can kick dust into the air. The water turns the cuttings into slurry, a gray mud, and that runoff has to be vacuumed up or contained instead of left to run down the driveway. Los Angeles County takes reports of illegal dumping and discharge into its storm drains from anywhere in the county, so before the saw starts we look at where your work area drains and set up to catch what comes off. We also check whether your city or the county wants a permit for your address, and if one's needed, we pull it and handle the paperwork for our part of the job.
Around Norwalk we cut a lot of older driveways and garage slabs, and plenty of block walls in tight side yards where a big saw barely fits. We're based in Norwalk and work across the cities around it in southeast Los Angeles County and north Orange County, and we see the same kinds of slabs on jobs in Downey and Bellflower. If your city isn't on our site, call and ask.
Why Norwalk homeowners call T&M Norwalk Concrete Company for concrete cutting
I see the job myself
I look at the job in person before you get a price, and I'm on site with our crew when the cutting gets done. If the scan or the first cut turns up something nobody expected, the person deciding what to do is the one who walked your site.
In business since 2021
I started as a helper on a small crew, hauling and setting forms, and opened this business after years on other people's jobs. We're known for taking the odd ones, like tight yards and tricky cuts, and for finding out why concrete moved before anyone patches it.
Licensed and insured in California
California's contractors board has a license class that covers concrete sawing, breaking and coring work. We're licensed and insured, which matters when a saw is going into a wall or a slab that might have steel inside.
On a cut, what counts most is knowing what's inside the concrete and where the water will go before the blade touches it. Send us your job details or call (562) 307-9138 and I'll come take a look.
Request a quoteGet a free written estimate for your concrete cut
Send the form and we'll reply within one business day to set a time for me to come out. The estimate is free, done on site and comes with no obligation, so you can weigh it against anyone else's.
What happens after you call us about concrete cutting in Norwalk?
Call or send the form
Call (562) 307-9138 or use the form, and we'll set a time for me to come out to your place. If you have house drawings, set them aside for the visit.
I look and write it up
I look at the surface, ask what the cut needs to do and check whether we'll need drawings or a scan first. Then I send a written estimate that lists the saw cuts, any core holes and any scan as separate lines, so you can see what moves the total.
We cut, clean up, walk through
If you go ahead, we set up for the water, make the cuts and clean up the slurry before we pack up. Then I walk the job with you so you can see every line before we leave.
Frequently asked questions
How much does concrete cutting cost per foot in Norwalk?
Professional saw cutting of concrete slabs usually runs about $4 to $15 per linear foot across the US, and that's for the saw cut itself, not our price. Reinforced or deeper slabs cost more per foot than a plain slab cut, and wall sawing often runs higher still, so I price your job from what I see on site.
Why does a small concrete cutting job cost so much?
On a small job, a minimum or mobilization charge, the cost of bringing the crew and saw out, can make up most of the price instead of the per-foot rate. Your written estimate shows how it breaks down, so you can see where the money goes.
What is the best way to cut a round hole in concrete for a pipe?
Core drilling, a hollow round bit that cuts a clean plug out, is the normal way to make holes for pipes, drains, conduit and other lines, rather than saw cuts. Core holes aren't priced like ordinary saw cuts, so if your job needs both, the estimate lists them as separate items.
How do I get ready for a concrete cutting crew?
Clear furniture, cars, stored stuff and debris out of the work area before we arrive, so the crew can set up and cut without moving things around. If we've agreed to use your power and water, make sure the crew can get to them.
Can you cut concrete inside a house or garage?
Yes, but the saw changes indoors. A concrete sawing trade association's sample spec calls for good ventilation and air flow when an engine-powered saw cuts an interior wall or slab, and it lists electric, hydraulic and air-powered saws as other choices for indoor work, so I look at the room on the estimate visit and match the saw to it.
Is concrete cutting the same as concrete removal?
No, sawing the concrete and taking it out are two separate jobs. A cutter may only make the outline or trench lines and leave the cut pieces in place, so tell us whether you want them left or hauled off and the estimate will say which you're getting.
Other concrete work that often follows a cut
Concrete driveway building
Once the old section is out, the new slab holds up best when the ground under it is dug out and packed, so we treat the replacement like a full new pour.
Concrete patio construction
When a cut opens up your back yard for a bigger or reshaped patio, we can pour the new slab with joints cut in so any cracking follows a line we chose.
Norwalk, CA
Tell us what you need cut
Call (562) 307-9138 or send the form with the surface, about how many feet need cutting, any doorway or pipe holes, and house drawings if you have them, so I come out ready with the right questions.